top of page

Jerguson® Series L10™ Liquid Level Gages

Large Chamber Glass Gage for easy reading of Boiling Liquids

Features

  • Recessed Gasket Seat in Chamber and Cover

  • Tempered Borosilicate Glass conforming to BS3463, JIS B8211, & DIN 7081

  • All parts listed in ASTM & ASME B31.3

  • ABS Certified

  • For fluids with low boiling point, such as: Ammonia, Propane, Butane, Methane, Ethylene, LNG, & Refrigerants

Jerguson Large Chamber Liquid Level Gages are designed to give an accurate liquid level reading of liquids that have a tendency to surge or boil.  These glass gages are highly effective in:

Jerguson® Series L10™ Liquid Level Gages

  1. reducing the boiling effects of entrained gas being released under low pressure,

  2. eliminating apparent level fluctuations that occur in standard gages (with small chambers) when boiling / flashing vapors try to rise to the surface, and

  3. applications where the operating temperature is below freezing and high ambient temperatures cause the temperature of the fluid in the gage to exceed the boiling point of the liquid.  In applications where the operating temperature is below freezing the gage must be equipped with non-frost extensions.
     

Jerguson Large Chamber Armored Glass Gages are available in reflex or transparent design.  The liquid chamber is constructed of heavy tubing, carefully slotted and machined to provide plane seats for the gaskets and glass assemblies.  Covers are steel secured with specially designed steel bolts.

TEST PRESSURE: All gages are hydrostatically tested by Jerguson prior to shipment @ 1 -1/2 times the design pressure rating at 100°F (38°C).

series L10 table_1.JPG
series L10 table_2.JPG

Resources:

bottom of page