Clark Reliance - Sizing Eductors, Eductor Applications

	An eductor is a pump that uses a fluid to perform the work of pumping another fluid (or solid). The fluid doing the work is termed the motive fluid, and the fluid being pumped is the suction fluid. The motive fluid employed can be liquid. gas or steam. The suction fluid can be liquid. gas or steam. Other names for eductors include jet pumps. ejectors. venturi pumps, siphon pumps, sleam siphons. and injector pumps. Eductors operate on basic principles of flow dynamics. What makes the Jacoby-Tarbox (JRG/JT) Eductors superior is the way advanced computer modeling has been used to maximize efficiency. This same computer modeling allows Clark-Reliance to simulate your process needs and recommend the correct product every time.	Eductor Selection Guide
		Suction	Motive
		Liquid	Liquid	Steam	Gas
			Pump from Tank Pump from Pump Dilute in Line Transport Liquid	Pump from Tank Pump from Sump Heat Liquid	Apply Spray Humidify
			SL, ML, HL	SG, HG, TLA	Custom Units
		Steam	Heating in Line Condensing Steam Sterilize Degrease	Thermocompressor	Humidity Exhaust Vessels
			ML, HL, MLH, MLE, ULJ, ULH	Contact Factory	SG, HG, ML
		Gas	Vacuum Filtration Exhaust Vessels Evacuate Vessels Aerate Liquids Distillation Prime Pumps	Vacuum Filtration Exhaust Vessels Distillation Prime Pumps	Vacuum Filtration Exhaust Vessels Distillation Prime Pumps
			ML, MLE	SG, HG	SG, HG, ML
		Solids	Forming Slurries Wet Polymers Dilute Mix	Transport Humidify Solids	Pneumatic Transport
			ML, ULJ	SG, HG	ULJ, SL, ML, SG
	Product Catalogs
	Eductors Designed in accordance with ASME specifications, and are manufactured using advanced casting and machining processes to maximize their flow efficiency Tank Liquid Agitators Designed for “in-tank” applications, efficiently using the supplied energy for mixing, blending, heating, aeration, or solid suspension as required.	Eductors for Pumping Liquid Using a liquid,gas or steam source to pump or mix a secondary liquid into your process. Eductors for Pumping Gases Pumping or exhausting gases using an existing gas,steam or liquid supply. Eductors for Heating Liquids Heating with maximum efficiency, in-line or in your tank by injecting steam directly into your process through an eductor.