Jacoby-Tarbox Eductors Jet Pumps Tank Liquid AgitatorsEDUCTOR APPLICATION GUIDE

 

 

 

 

 

 Eductors, Tank Liquid Agitators Jacoby-Tarbox Jet pumps JRG/JT

JRG/JT Eductors/Jet-Pumps are the most efficient way to pump many kinds of liquids and gases, and even solids. Applications are generally categorized as follows: Liquid motive pumping a liquid. Steam motive pumping a liquid. Liquid motive pumping a gas.

Other application areas are in water treatment processes and in those for gases.

Liquid Motive Pumping Liquid

Typical eductor applications include:

  • Draining sumps.
  • Pumping in areas where an electric pump would present an explosion hazard.
  • Boosting the NPSH (Net Positive Suction Head) of a pump.
  • Pulling an acid or base into awater stream for dilution purposes.

Steam Motive Pumping Liquid

  • For draining sumps, where electrical lines are not available.
  • For drawing water from ponds and warming it as it is being supplied to processes.
  • For heating process fluids in-line.
  • For cooking slurries in-line.
  • For heating reactor jackets.

Liquid Motive Pumping Gases

  • To aerate a liquid to reduce the BOD (Basic Oxygen Demand) of the fluid.
  • To exhaust vapors or gas from aroom.
  • To evacuate a vessel.
  • To scrub fumes from a gas.
  • To inject air, ozone, chlorine or other gas into a process liquid.
  • To create Vacuums

Steam Or Gas Motive Pumping Gases

  • To lower the boiling point of avessel, saving heating costs.
  • To produce a vacuum for filtration processes.
  • To prime pumps and vessels.
  • To prime siphon lines.

Mixing

  • To provide agitation of a vessel.
  • To control shear during agitation

Pumping Liquids

For Complete information refer to our eductors pumping liquids guide
Model
SL
ML
HL
SG
HG
Operating Media Liquid Liquid Liquid Steam Steam
Operating Pressure (psig) 15-200 15-200 15-200 30-150 20-150
Pressure Recovery % 10-15 30-35 40-50 15-20 30-35
Maximum Suction Lift 27ft 27ft 27ft 20ft 20ft
Maximum NPSH Req'd 3ft 3ft 3ft 13ft 13ft
             

Pumping Gases

For complete information refer to eductors pumping gases guide
Model
ML
MLE
SG
HG
  
Operating Media Liquid Liquid Steam,Air Steam,Air  
Operating Pressure (psig) 20-200 20-200 20-150 10-100  
Max. Vacuum 29 in Hg 29 in Hg 24 in Hg 23 in Hg  
Discharge Pressure 15 15 12 35  
Applications
Evacuate, Exhaust, Prime
             

Heating Liquids

For Complete Information refer to our eductors heating liquids guide
Model
MLE
ML
MLH
ULJ
ULH
TLA
Heating Process In-Line In-Line In-Line In-Line In-Line In-Tank
Max. Temp Rise 180 200 215 200 200 125
Maximum GPM Heated 5000 5000 5000 5000 700 2000
Steam Press Range Vac-45 Vac-100 Vac-120 0-150 0-150 10-140
             

Solids Transport

Contact the factory for eductor applications for solids
Model
SL
ML
HL
ULJ
SG
Operating Media
Liquid,Air
Liquid,Air
Liquid,Air
Air
Air

Operating Pressure (psig)

 5-100 5-100 5-100 15-50 20-100
             

Tank Agitation

For complete information, turn see our tank liquid agitator guide
Model
TLA
  
Operating Pressure 10-150
Suction Pick-up Ratio 4:1
Flow Field 1 ft per psi
Max. GPM Motive 3200
Viscosity Range 1-2000 cP

 

Product Catalogs

  
  • Eductors-Jet pumps
    • Designed in accordance with ASME specifications, and are manufactured using advanced casting and machining processes to maximize their flow efficiency
  • Tank Liquid Agitators
    Designed for “in-tank” applications, efficiently using the supplied energy for mixing, blending, heating, aeration, or solid suspension as required.